我们将通过电子邮件向您发送模具测试视频，并通过DHL / TNT向您发送样品。
Plastic mould for container type
P20H, 2344, 718H die steel
Glue feeding method
Hot runner multi-point injection
Cylinder ejection, bullet ejection, top piece ejection
Multi-point cross short circulation system
Mold cycle (unloading to trial mold)
40-65 working days (except for special circumstances)
In recent years, the rapid economic development of various countries and regions, the transportation demand of various industries has also increased year by year, and the demand for turnover boxes, frames, and plastic pallets has increased. Our company designs and manufactures molds for customers' wine bottles, milk bottles and other bottle turnover boxes.
How to choose die steel?
The selection principle of injection mold materials The components of injection molds can be divided into two categories according to their uses. One type is structural components, including casting systems, guiding components, fixed (moving) templates, thimble components, and supporting components. Plastic injection molding materials are usually medium and low carbon structural steels or alloys. The other is molded parts, including cavities, cores and inserts, etc., which are key components for direct manufacturing of plastic parts. The operating temperature of the injection mold is 200 to 300°C. The cavity of the injection mold is complex, and it has high requirements for dimensional accuracy and surface roughness. Corresponding requirements are put forward for the processing performance of injection mold steel, mirror polishing performance, heat treatment deformation and dimensional stability. Therefore, when the ACO mold selects the injection mold material, it is necessary to ensure the performance requirements of the plastic. Injection molds, improve their processing performance as much as possible. The main selection principles of injection mold materials are as follows:
Packing box design attention
The process of making a mold
Our company will provide you with professional and timely communication according to your project.
First, we will make product/mold drawings according to your samples/product drawings, according to your requirements or modifications, and then send them to you for approval. We will also provide you with technical advice based on our experience and knowledge.
When making molds, we will send you processing reports and pictures via email every 7-10 days.
We will send you the mold test video by email, and send you samples via DHL/TNT.
If our products have quality problems during the warranty period, we will provide you with the service of replacing damaged parts; if you encounter any problems when using our molds, we will also provide you with professional communication.
Q1: Are you a manufacturer or a trading company?
A1: We are the manufacturer. Our factory is located in Taizhou City, Zhejiang Province.
Q2: How many days does it take to make a mold?
A2: The total cycle of mold from blanking to mold trial is 40-65 working days (except for special circumstances), and each link is kept on file so that customers can understand the progress of the mold at any time.
Q3: I have a sample of plastic parts, can it be mass produced?
A3: Yes, we usually manufacture molds and products, but we mainly manufacture molds and produce plastic parts that require a certain quantity.
Q4: I am worried about the mold life, can you guarantee the mold quality?
A4: We know that quality is the first priority for customers, so we always use high-standard mold materials to make molds and perform some heat treatments to extend mold life. If customers only need plastic parts, they can keep the mold in our company, we will take care of the mold and provide quality assurance for the life of the mold.